You are here : Home > Mats > 5Sided > By Frame Measurement

United States - USD

Close

View delivered prices to your country
and in your currency.

Select destination:

Preferred currency:

	Trampoline
	Trampoline Parts
	Enclosure Parts
	Trampoline Accessory
	Trampoline Mats
	Enclosure Systems

Your ZIP Code :

*Details...


Name	:

E-mail	:

We answer quickly!

5-sided trampoline mat
order form using frame
dimensions

(1 customer reviews)

Related Links :: Measure Mat || Measure Frame

If your old mat is available and can be measured without spanning a hole, we prefer to receive your mat measurements. Please go to mat measuring instructions.

Please Note :
	Collecting frame measurements requires two people.
	Hold the measuring tape tight. Do not let the tape sag.
	Do not lean against the frame while measuring.
	When measuring frame, measure to and from where the spring hooks the frame. Usually springs hook into spring holes drilled into the frame, but some frames have pieces of zig-zag wire welded to the inside edge of the frame. Regardless, measure to and from where the spring hooks the frame.

Please select your trampoline's corner configuration :

Corner Configuration for Octagonal Trampoline Mat - Normal Normal - Springs butt up on each side of corner. This is the most common corner configuration.

Corner Configuration for Octagonal Trampoline Mat - Normal with Diagonal Normal with Diagonal - In addition to the springs on each side of the corner, there is an extra spring mounted diagonally. These extra corner springs are typically longer than other springs.

Corner Configuration for Octagonal Trampoline Mat - Diagonal Only Diagonal Only - Each corner has only a diagonal spring with no additional springs on each side of the corner. These corner springs are typically longer than other springs.