By Richard Miller
Assembling a trampoline does not require any special tools; a woodblock
and hammer could come in handy. However, we recommend wearing work
gloves during assembly. The whole set-up process takes not more
than 30-40 minutes.
Some important factors which need to be kept in mind before using
the trampoline are given below:
# It is essential to place the trampoline where there is adequate
overhead and lateral clearance. A minimum of 24 feet (7.3m) is recommended
from the floor or ground. When used outdoors, care should be taken
to provide adequate clearance for wires, tree limbs, fences, and
other possible hazards.
# Place the trampoline on a level surface before use. A loose, thick
white sand application is recommended to be applied beneath the
trampoline and in the immediate surrounding area.
# The trampoline should always be used in well lighted area. If
artificial illumination is provided, it is recommended that such
artificial illumination meet the standards of 50 fc (5381x) as recommended
for gymnasiums and field houses in IES Recommended Practice RP-6.
# Remove any obstructions from beneath the trampoline and enclosure.
# Assembly requires two adults. Keep children away from the trampoline
enclosure until it is fully assembled.
# Use gloves to protect your hands from pinch points during assembly.
# Make sure that the trampoline is properly assembled, with the
frame pad properly attached, before you assemble the trampoline
For detailed instructions on how to assemble your Fun Spot Trampolines,
please visit our site or in case of any difficulty please feel free
to call us on 800-241-7134 or write in your query.