Order Round Trampoline Bed Using Bed Dimensions

If your old trampoline bed is in suitable condition, we prefer you supply the measurements requested below.

Measuring Tips :
• When collecting #1 and #2 measurements below be sure to follow the 'grain' of your fabric. To find the grain, look closely at the fabric to notice the yarn runs in two directions from 12 to 6-o'clock and also from 9 to 3-o'clock. Measure in both directions following the path of the yarn.
• Measure with the grain even if the metal hardware along the edge of your bed is missing. If metal hardware is missing, add the appropriate distance to your measurement to account for the missing hardware.
• Bed can be measured while installed or while laying flat. If measured off the trampoline, gently pull the bed flat while measuring.

Measurement Instructions & Entry

 

Select perimeter hardware type on your original bed to view measurement instructions:

• Metal Triangles
  
• Grommets / Eyelets
  
• Others
  

Grommet bed depicted for measurement collection. New beds have metal traingles which are more durable than grommets.

Select Measuring Unit

: English (Feet / Inches) Metric (CM)

Select Format

: Inches Feet / Inches

 Diameter 1

:

Select before entering dimensions.

 Diameter 2

:

 

  Why 2 diameters?

 Spring count

:

 Diameter 1

: Fraction 0 1/8 or .125 ¼ or .25 3/8 or .375 ½ or .5 5/8 or .625 ¾ or .75 7/8 or .875  

 Diameter 2

:  Fraction 0 1/8 or .125 ¼ or .25 3/8 or .375 ½ or .5 5/8 or .625 ¾ or .75 7/8 or .875

 Diameter 1

: 

 Diameter 2

: 

 Diameter 1

: Feet 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Inch 0 1 2 3 4 5 6 7 8 9 10 11 Fraction 0 1/8 or .125 ¼ or .25 3/8 or .375 ½ or .5 5/8 or .625 ¾ or .75 7/8 or .875

 Diameter 2

: Feet 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Inch 0 1 2 3 4 5 6 7 8 9 10 11 Fraction 0 1/8 or .125 ¼ or .25 3/8 or .375 ½ or .5 5/8 or .625 ¾ or .75 7/8 or .875

 

  Why 2 diameters?

We ask for two diameter measurements because we expect slight variation. Please be certain you've measured in two directions with the 'grain' of the weave.

I measured in both directions with the 'grain' of the weave and the dimensions were identical.

I will remeasure; open measurement collection sheet.

 Spring count

: 

Your spring count is unusual. We can easily and quickly produce a custom spring bed but it will have restricted return privileges.
We urge you to recount the holes in your frame.

I will recount.

Next

Confirmations

This section will display contents after completion of Step 1.

Your measurements of  -  and  -  were of:

Jumping Bed

Frame

If your diameter dimensions were collected from your frame, please
use the frame measurement order form.

Take me to the order form to enter frame dimensions.

I was mistaken; my dimensions were collected from my jumping bed.

How did you measure your bed?

It is important to measure your original bed to and from where the spring touches the bed and not to the edge of the fabric. Please review measurement instructions above and remeasure.

I will remeasure; open measurement collection sheet.

I was mistaken. My dimensions were collected to and from where the spring touches the bed.

Were your dimensions collected from a used trampoline bed?

Yes - I measured my old trampoline bed.

No

Did you carefully measure along the 'grain' of the fabric's weave?

Yes - Measured along
fabric's grain

No or Unsure - I ignored or was unsure of fabric's grain

Were your dimensions collected from a used trampoline bed?

 Yes - I measured my old trampoline bed.    
 No

How should we size your bed?

Match submitted dimensions as closely as possible.
Note - The new bed will stretch (elongate) over its life (1% or more).

Other - Please describe:

Optional

Did you measure while the bed was installed on trampoline?

Yes - The bed was installed when measured.

No - The bed was not installed when measured.

Next

Bed Options

Bed Fabric

:

Mat Fabric Options

• 
• 
• 
• 
• 
• 
• 
Have a pit trampoline?

 

UV Protection
Details

:

UV Protection Options

 

 

SunShield:

• 

• 

• 

• 

• 

Remove

 

 

Sewing option

:

Sewing Options

 

• 
• 
• 

Remove

 

 

Perimeter triangles
Details

:

 Normal
 Industrial + $10

Webbing type
Details

:

 Polypropylene
 Nylon Seat Belt + $15

Nylon seat belt webbing is available only with commercial triangles.

Select normal triangles and remove nylon seat belt webbing from order.

Keep Industrial triangles and nylon seat belt webbing.

Next

Additional Info

   Please tell us about your trampoline (optional):

Brand

:

Model #

:

Bed Part #

:

Purchased From

:

Year Purchased

:

Special Instructions :

Next

Quantity : Price : Complete Step 1 for price.